Profitec Jump vs Profitec Move
Two espresso machines side by side. They differ on boiler / heating, boiler size, warm-up time, width. The Profitec Jump has a heat exchanger system and the Profitec Move has a dual boiler.
Profitec Jump
Profitec Move
What actually differs
- The Profitec Jump has a heat exchanger system and the Profitec Move has a dual boiler.
- The Profitec Jump has a larger boiler (1.6 L against 0.4 L for the Profitec Move).
- The Profitec Move has a faster warm-up (9 min against 20 min for the Profitec Jump).
- The Profitec Move is lighter at 18.7 kg; the Profitec Jump weighs 21.5 kg.
- Voltage: the Profitec Jump has 230V or 115V, the Profitec Move has EU, UK, CH, AU: 230V/2200 W US: 115 V/1600 W.
- Size, Profitec Jump against Profitec Move: width 22.8 cm against 27 cm, depth 44.8 cm against 44.5 cm, height 37.2 cm against 37.5 cm.
Which one should you buy?
Home baristas who make milk drinks and want steady temperature
Suits home baristas who make milk drinks and want steady temperature with PID control. The trade-off is a long warm-up of about 20 minutes before the machine is ready.
Skip it if: You want a compact, low-effort machine
Full specs and review →Prosumer-level users needing fast heat-up and dual boilers in limited counter space.
The Profitec Move fits experienced users who want dual PID control and quick startup in a compact dual-boiler machine at this price tier. It matches the prosumer category.
Skip it if: Beginners or buyers seeking lower-priced machines should not buy it.
Full specs and review →Where each one wins
- A larger boiler
- A faster warm-up
Specs compared
Rows where they differ are highlighted. Specs are from manufacturer sources; blanks are left blank, never estimated.
| Spec | Profitec Jump | Profitec Move |
|---|---|---|
| Typical price | $$$$ $1,500+ | $$$$ $1,500+ |
| Machine type | Semi-automatic | Semi-automatic |
| Boiler / heating | Heat exchanger | Dual |
| Boiler size | 1.6 L | 0.4 L |
| PID temperature control | Yes | Yes |
| Portafilter size | 58 mm | 58 mm |
| Pressure gauge | Yes | Yes |
| Can be plumbed in | No | No |
| Needs mains power | Yes | Yes |
| Water tank | 2.8 L | 2.8 L |
| Warm-up time | 20 min | 9 min |
| Width | 22.8 cm | 27 cm |
| Depth | 44.8 cm | 44.5 cm |
| Height | 37.2 cm | 37.5 cm |
| Weight | 21.5 kg | 18.7 kg |
| Voltage | 230V or 115V | EU, UK, CH, AU: 230V/2200 W US: 115 V/1600 W |
| Warranty | 3 years | 3 years |
What they have in common
Both record the same value for: machine type (Semi-automatic); pid temperature control (Yes); portafilter size (58 mm); pressure gauge (Yes); can be plumbed in (No); needs mains power (Yes); water tank (2.8 L); warranty (3 years).
Profitec Jump vs Profitec Move: common questions
What is the main difference between the Profitec Jump and the Profitec Move?
The Profitec Jump has a heat exchanger system and the Profitec Move has a dual boiler. The Profitec Jump has a larger boiler (1.6 L against 0.4 L for the Profitec Move).
Which is better for prosumer setups, the Profitec Jump or the Profitec Move?
We tag the Profitec Move for prosumer setups; the other is not tagged that way. See the pick boxes above for who each one suits.
Do the Profitec Jump and the Profitec Move use the same portafilter?
Yes, both use 58 mm.
Is the Profitec Jump or the Profitec Move more expensive?
Both sit in the same typical price band, $$$$ $1,500+.