Turin DF54 vs Turin SK40
Two grinders side by side. They differ on burr type, burr size, hopper capacity. Burr type: the Turin DF54 has Flat, the Turin SK40 has Conical.
Turin DF54
Turin SK40
What actually differs
- Burr type: the Turin DF54 has Flat, the Turin SK40 has Conical.
- The Turin DF54 has larger burrs (54 mm against 40 mm for the Turin SK40).
- The Turin DF54 has a larger hopper (50 g against 40 g for the Turin SK40).
Which one should you buy?
People who brew both espresso and filter coffee
A single-dose flat-burr grinder with 54 mm burrs and stepless adjustment, covering espresso to filter. Its 50 g hopper suits one dose at a time rather than bulk storage.
Skip it if: You want a large hopper that holds beans in bulk.
Full specs and review →People who brew both espresso and filter coffee
People who brew both espresso and filter get a single-dose grinder with 40 mm conical burrs and stepless adjustment. Its 40 g hopper and 400 rpm motor reflect a small, deliberate design.
Skip it if: You want flat burrs, as this grinder uses 40 mm conical burrs.
Full specs and review →Where each one wins
- Larger burrs
- A larger hopper
Specs compared
Rows where they differ are highlighted. Specs are from manufacturer sources; blanks are left blank, never estimated.
| Spec | Turin DF54 | Turin SK40 |
|---|---|---|
| Typical price | $$ $150–400 | $$ $150–400 |
| Grinder type | Electric | Electric |
| Burr type | Flat | Conical |
| Burr size | 54 mm | 40 mm |
| Adjustment | Stepless | Stepless |
| Grind range | All-purpose | All-purpose |
| Single-dose | Yes | Yes |
| Hopper capacity | 50 g | 40 g |
| Warranty | 1 year | 1 year |
What they have in common
Both record the same value for: grinder type (Electric); adjustment (Stepless); grind range (All-purpose); single-dose (Yes); warranty (1 year).
Turin DF54 vs Turin SK40: common questions
What is the main difference between the Turin DF54 and the Turin SK40?
Burr type: the Turin DF54 has Flat, the Turin SK40 has Conical. The Turin DF54 has larger burrs (54 mm against 40 mm for the Turin SK40).
Do the Turin DF54 and the Turin SK40 use the same burr type?
No. The Turin DF54 has Flat and the Turin SK40 has Conical.
Is the Turin DF54 or the Turin SK40 more expensive?
Both sit in the same typical price band, $$ $150–400.